When the two safety sensors cannot see each other, the opener refuses to close the door, so the usual causes are misalignment, dirt, wiring or a failed eye.

Signs the sensors are the problem
The door goes down a short way, then reverses, or it will not move at all while the opener lights blink. A sensor light that is dark or flickering also gives it away. These symptoms usually point to the safety eyes before anything else.
What typically goes wrong
- One eye knocked out of alignment
- Dirt, spiderwebs or moisture on a lens
- Loose or damaged low-voltage wire
- A failed sensor or weak connection
- Bright sun hitting the receiver
Hillside garages often face glare through large openings at the end of the day, which can bother sensors, and travel time for the technician may be longer.
Getting clear pricing
Give the brand of the opener, describe the lights and say when the trouble began. Ask about any minimum for the visit. Companies that explain the process and the parts before starting are easier to compare and trust.
What the technician does
The technician looks at the indicator lights, checks both sensors for alignment and dirt, tests the wiring from each eye to the opener and tries the door through a cycle. Fixing may mean realigning, cleaning, repairing wire or swapping the sensor pair.
Safety, permits and power in Briarcliff
Every residential opener sold under the federal entrapment rule has to auto-reverse on contact and pair with a backup device, usually photo eyes near the floor. If yours ignores an obstruction, unplug it and leave the door closed.
Many neighborhoods here have an HOA or deed restrictions. If the work changes the door's look, such as a new style, window layout or color, check the approval process before anything is ordered.
Briarcliff Village Office handles building permits for Briarcliff addresses; a like-for-like door swap often needs nothing, while framing changes may.
If the opener and the lights quit together, call your electric utility's outage line first. The emergency release cord lets you open a balanced door by hand; pull it only with the door closed.
Calls from Briarcliff are often matched with companies that also cover Cedar Park, Point Venture and Lakeway.
Before you open the opener box
The sensors run on low voltage, but the opener and its terminals do not. Unplug it before reaching near the unit. Anything beyond cleaning or a gentle nudge of the sensor is best left to a technician with a meter.
Garage Door Sensor Repair questions in Briarcliff
Can I bypass the sensors to close the door?
Are all garage door sensors the same?
Is this site a garage door company?
What if only one sensor light is lit?
More garage door services in Briarcliff
Garage Door Sensor Repair nearby
Helpful guides
Sources
Last updated: