Sensors sit near the floor on each side of the door, and a bump or a loose bracket can tilt one just enough to break the beam.

Common sensor complaints
- Door reverses before touching the floor
- Opener lights flash and the door will not close
- One sensor light is off or blinking
- Door works from inside but not from a remote
- Trouble only at certain hours of the day
What typically goes wrong
- One eye knocked out of alignment
- Dirt, spiderwebs or moisture on a lens
- Loose or damaged low-voltage wire
- A failed sensor or weak connection
- Bright sun hitting the receiver
Dust from limestone soil in this part of Travis County settles on sensor lenses, so a soft cloth wipe is a good first check, and rattling from the slab can nudge brackets out of line.
Small fix, small bill
Many sensor problems end up being alignment, a dirty lens or a loose connection, and these take short visits. If the technician finds something deeper, ask for it to be explained and priced before more work begins.
Wire and bracket fixes
Loose wire can be re-secured, damaged runs spliced or replaced and shaky brackets reinforced so the eyes stay aligned. A neat job keeps wire out of the door's path and away from pests. Ask that anything repaired be secured firmly.
Safety, permits and power in Rollingwood
Federal rules (16 CFR part 1211) require residential openers to reverse when they hit something and to come with a secondary device such as photo-eye sensors, so a door that won't reverse needs attention before anyone uses it again.
Many neighborhoods here have an HOA or deed restrictions. If the work changes the door's look, such as a new style, window layout or color, check the approval process before anything is ordered.
Rollingwood Planning & Development handles building permits for Rollingwood addresses; a like-for-like door swap often needs nothing, while framing changes may.
Opener dead and the lights out too? That's an outage, not a broken opener. Austin Energy takes outage reports at 512-322-9100; meanwhile, the red emergency release lets you lift a balanced door by hand once it's fully closed.
Nearby, the same kind of help is available in Austin, West Lake Hills and Shady Hollow.
Gentle alignment
If one sensor has clearly been bumped, you can sometimes nudge it back until its light glows steady. Do not bend brackets or force anything. If that does not work after a try or two, stop and call rather than risk breaking the lens.
Garage Door Sensor Repair questions in Rollingwood
Is it worth repairing sensors rather than replacing the opener in Rollingwood?
Why do my sensors work some days and not others?
What if only one sensor light is lit?
Does calling commit me to hiring anyone?
More garage door services in Rollingwood
Garage Door Sensor Repair nearby
Helpful guides
Sources
Last updated: